button_deltron_website.png

Filter D-Sub connectors

Deltron Filter D-Sub connectors

offer excellent protection against EMI and RFI. For trouble-free signal transmission in an EMC-polluted environment.
Available as standard connector, filter-adapter and Filter Press-Fit connector. Also available with a mix of different capacities in one filter connector.

Deltron D-Sub filter connectors are characterized by a very good filter quality. The FP and PI filter connectors, especially developed for industrial applications, offer excellent protection against EMI and RFI.

The products are manufactured according to the standards MIL-C-24308 and IEC60807 (DIN41652).
A standard range of 180 to 6800 pF is available, other capacities on request.

In addition, the filter plate is metalized on the rear side, so that a high f-tightness is achieved.

The filter connectors are available in various versions and assembly options such as brackets, rivet nuts, hex screws or board locks.

D-Sub Filter connector overview

with more than 130,000 product variation

Deltron AG offers the following Filter-Type-Connectors:

C-Planar Filter connectors:

Filter connectors Series D*FP are especially designed for industrial applications and are providing an excellent protection against EMI and RFI.
By using D-Subminiature standard components a cost-effective production can be achieved as well as a 100% compatibility with equivalent products according DIN41652, MIL-C-24308 and IEC60664-1. D-Subminiature standard accessories may be used.

Pi Filter connectors:

Filter connectors Series D*Pi are especially designed for industrial and professional applications and are providing an excellent protection against EMI and RFI.
By using D-Subminiature standard components a cost-effective production can be achieved as well as a 100% compatibility with equivalent products according DIN41652, MIL-C-24308 and IEC60664-1. D-Subminiature standard accessories may be used.

//Features

  • D*FP is a quality Filter connector version with 100% Frequency tightness.
  • f-tightness and mechanical stability are reached by closed backshell
  • High-precision, machined Signal contact
  • Contacts are available in quality class 2 and 1.
  • Available contact size 09, 15, 25 and 37
  • Straight and 90° solder pin and solder cup
  • Various assembly possibilities

The used Filter plates are equipped with Planar chip capacitors (ceramic material X7R|NPO), which are available in capacity values of 180pF up to 6800pF. The Filter plates are metalized on the backside to guarantee a high f-tightness. A Planar chip capacitor plate connected with the back shell provides a good filter quality, especially for signal contacts.

Attenuation characteristics (FP)

attenuation_planar_filters.jpgAttenuation per MIL-STD-220 at 25 °C with no applied voltage or current.

//Features

  • D*PI is a quality Filter connector version with 100% Frequency tightness.
  • f-tightness and mechanical stability are reached by closed backshell
  • High-precision, machined Signal contact
  • Contacts are available in quality class 2 and 1.
  • Available contact size 09, 15, 25 and 37
  • Straight solder pin and solder cup
  • Various assembly possibilities

The used Filter plates are equipped with PI-Tubular ceramic capacitors, which are available in capacity values of 100pF up to 5000pF. The Filter plates are metalized on the backside to guarantee a high f-tightness.

 

Attenuation characteristics (Pi)

attenuation_pi_filters.jpgAttenuation per MIL-STD-220 at 25 °C with no applied voltage or current.

SELECTION OF Filter CONNECTOR:

Call us: Telephone +41 34 448 12 12

ANY QUESTIONS?

we are happy to help!

Give us a call or contact us without obligation using the contact form.
Telephone +41 34 448 12 12